Welcome to Flagg Incorporated. Amana Tool ® 47180 Carbide Tipped Dynabit Laminate Trim, Flush Helix 5/8 Dia x 5/8 x 1/4 Inch Shank

Amana Tool ® 45461 Carbide Tipped Flush Trim Plunge Template 1/2 Dia x 1-1/4 x 1/4 Inch Shank with Upper BB

45461

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45462 Carbide Tipped Flush Trim Plunge Template 5/8 Dia x 1 Inch x 1/4 Shank with Upper BB

45462

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45464 Carbide Tipped Flush Trim Plunge Template 3/4 Dia x 1 Inch x 1/4 Shank with Upper BB

45464

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45465 Carbide Tipped Flush Trim Plunge Template 3/4 Dia x 1-3/4 x 1/2 Inch Shank with Upper BB

45465

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45467 Carbide Tipped Flush Trim Plunge Template 1 Inch Dia x 1-3/4 x 1/2 Shank with Upper BB

45467

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work. Maximum RPM 20,000.

Amana Tool ® 45468 Carbide Tipped Flush Trim Plunge Template 1-1/8 Dia x 1-1/2 x 1/2 Inch Shank with Upper BB

45468

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work. Maximum RPM 20,000.

Amana Tool ® 46300 Solid Carbide UltraTrim Spiral 1/2 Dia x 1-1/4 x 1/2 Inch Shank with Double Lower Ball Bearing Up-Cut

46300

For the ultimate, chip-free finish in laminate, melamine, solid surface, fragile veneers and for template work of all kinds. The twin ball-bearing pilot enhances the stability of the tool. Available in 'Up-Cut' and 'Down-Cut' spirals.

Amana Tool ® 47090 Carbide Tipped Flush Trim 1/4 Dia x 1/2 x 1/4 Inch Shank

47090

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size.

Amana Tool ® 47092 Carbide Tipped Flush Trim 1/4 Dia x 1 Inch x 1/4 Shank

47092

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size.

Amana Tool ® 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank

47100

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank

47102

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47104 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank

47104

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47105 Carbide Tipped Dynabit Laminate Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank

47105

The Dynabit™ line features a modest down-shear for an excellent finish. The helix bits have a spiral-like twist to the cutting edges, making them especially good on difficult materials such as melamine. An adhesive-trapping gap between cutting edges and pilot bearing is featured on tools #47111 & #47113.

Amana Tool ® 47106 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank

47106

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47114 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank 3-Flute

47114

For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.

Amana Tool ® 47116 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank 3-Flute

47116

For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.

Amana Tool ® 47118 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 Shank 3-Flute

47118

For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.

Amana Tool ® 47124 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank

47124

Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and produces a smooth finish. For a superior finish, use the three-flute version. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut.

Amana Tool ® 47126 Carbide Tipped Flush Trim 1/2 Dia x 2 Inch x 1/2 Shank with Double Ball Bearing

47126

Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and produces a smooth finish. For a superior finish, use the three-flute version. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut.

Amana Tool ® 47150 Carbide Tipped No-File Trim .059 Radius x 1/2 Dia x 3/8 x 1/4 Inch Shank

47150

Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our No-File™ bit "breaks" the sharp edge as it trims the laminate flush. When used properly, the resulting edge is smooth and has a slight radius.

Amana Tool ® 47180 Carbide Tipped Dynabit Laminate Trim, Flush Helix 5/8 Dia x 5/8 x 1/4 Inch Shank

Amana Tool ® 45461 Carbide Tipped Flush Trim Plunge Template 1/2 Dia x 1-1/4 x 1/4 Inch Shank with Upper BB

Amana Tool ® 45462 Carbide Tipped Flush Trim Plunge Template 5/8 Dia x 1 Inch x 1/4 Shank with Upper BB

Amana Tool ® 45464 Carbide Tipped Flush Trim Plunge Template 3/4 Dia x 1 Inch x 1/4 Shank with Upper BB

Amana Tool ® 45465 Carbide Tipped Flush Trim Plunge Template 3/4 Dia x 1-3/4 x 1/2 Inch Shank with Upper BB

Amana Tool ® 45467 Carbide Tipped Flush Trim Plunge Template 1 Inch Dia x 1-3/4 x 1/2 Shank with Upper BB

Amana Tool ® 45468 Carbide Tipped Flush Trim Plunge Template 1-1/8 Dia x 1-1/2 x 1/2 Inch Shank with Upper BB

Amana Tool ® 46300 Solid Carbide UltraTrim Spiral 1/2 Dia x 1-1/4 x 1/2 Inch Shank with Double Lower Ball Bearing Up-Cut

Amana Tool ® 47090 Carbide Tipped Flush Trim 1/4 Dia x 1/2 x 1/4 Inch Shank

Amana Tool ® 47092 Carbide Tipped Flush Trim 1/4 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank

Amana Tool ® 47104 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 47105 Carbide Tipped Dynabit Laminate Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 47106 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank

Amana Tool ® 47114 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank 3-Flute

Amana Tool ® 47116 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank 3-Flute

Amana Tool ® 47118 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 Shank 3-Flute

Amana Tool ® 47124 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank

Amana Tool ® 47126 Carbide Tipped Flush Trim 1/2 Dia x 2 Inch x 1/2 Shank with Double Ball Bearing

Amana Tool ® 47150 Carbide Tipped No-File Trim .059 Radius x 1/2 Dia x 3/8 x 1/4 Inch Shank

Doellken

Festool

Hettich

Interbuild

King Plastic

Lumigraf

Lutron

Peter Meier

Rehau

Salice

Tresco

Wilsonart

Company Info

Customer Services

Our Offers

My Account