Menu
Search
Filters
Close
Menu
Previous productAmana Tool ® 45502 Carbide ...
Next productAmana Tool ® 45704 Carbide ...

Amana Tool ® 45700 Carbide Tipped V Groove 90 Deg x 3/8 Dia x 7/16 x 1/4 Inch Shank

Cut decorative "V" grooves and lettering on signs with this 'V' Groove bit. Use with an edge guide to chamfer and bevel edges. Can be used with handheld, table-mounted and CNC routers.
SKU: 45700

Excellent for cutting:

  • Wood
  • PVC Plastic
  • Sign Board
  • Solid Surface
  • Plywood
  • Veneered Plywood
  • Xanita® Board
  • 20lbs High Density Urethane
  • Acrylic
  • Foam
  • Laminate
  • Melamine
  • MDF/HDF

 

 

 

 

 

 

 

 

 

Excellent for cutting:

  • Wood
  • PVC Plastic
  • Sign Board
  • Solid Surface
  • Plywood
  • Veneered Plywood
  • Xanita® Board
  • 20lbs High Density Urethane
  • Acrylic
  • Foam
  • Laminate
  • Melamine
  • MDF/HDF

 

 

 

 

 

 

 

 

 

Similar Products
Picture of Amana Tool ® 201005 Carbide Tipped Brad Point Boring Bit R/H 5mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 201005 Carbide Tipped Brad Point Boring Bit R/H 5mm Dia x 57mm Long x 10mm Shank

201005
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 201008 Carbide Tipped Brad Point Boring Bit R/H 8mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 201008 Carbide Tipped Brad Point Boring Bit R/H 8mm Dia x 57mm Long x 10mm Shank

201008
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 203261 Carbide Tipped Hinge Boring Bit R/H 26mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 203261 Carbide Tipped Hinge Boring Bit R/H 26mm Dia x 57mm Long x 10mm Shank

203261
Application: Boring machines (10mm shank) and drill presses (3/8" shank).
Picture of Amana Tool ® 203351 Carbide Tipped Hinge Boring Bit R/H 35mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 203351 Carbide Tipped Hinge Boring Bit R/H 35mm Dia x 57mm Long x 10mm Shank

203351
Application: Boring machines (10mm shank) and drill presses (3/8" shank).
Picture of Amana Tool ® 203401 Carbide Tipped Hinge Boring Bit R/H 40mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 203401 Carbide Tipped Hinge Boring Bit R/H 40mm Dia x 57mm Long x 10mm Shank

203401
Application: Boring machines (10mm shank) and drill presses (3/8" shank).
Picture of Amana Tool ® 204005 Carbide Tipped Brad Point Boring Bit R/H 5mm Dia x 70mm Long x 10mm Shank

Amana Tool ® 204005 Carbide Tipped Brad Point Boring Bit R/H 5mm Dia x 70mm Long x 10mm Shank

204005
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 301005 Carbide Tipped Brad Point Boring Bit L/H 5mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 301005 Carbide Tipped Brad Point Boring Bit L/H 5mm Dia x 57mm Long x 10mm Shank

301005
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 301008 Carbide Tipped Brad Point Boring Bit L/H 8mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 301008 Carbide Tipped Brad Point Boring Bit L/H 8mm Dia x 57mm Long x 10mm Shank

301008
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 301010 Carbide Tipped Brad Point Boring Bit L/H 10mm Dia x 57mm Long x 10mm Shank

Amana Tool ® 301010 Carbide Tipped Brad Point Boring Bit L/H 10mm Dia x 57mm Long x 10mm Shank

301010
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 304005 Carbide Tipped Brad Point Boring Bit L/H 5mm Dia x 70mm Long x 10mm Shank

Amana Tool ® 304005 Carbide Tipped Brad Point Boring Bit L/H 5mm Dia x 70mm Long x 10mm Shank

304005
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.
Picture of Amana Tool ® 45190 Straight Plunge High Production 1/16 Dia x 3/16 x 1/4 Inch Shank

Amana Tool ® 45190 Straight Plunge High Production 1/16 Dia x 3/16 x 1/4 Inch Shank

45190
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45190 features a solid carbide cutting edge.
Picture of Amana Tool ® 45200 Straight Plunge High Production 1/8 Dia x 7/16 x 1/4 Inch Shank

Amana Tool ® 45200 Straight Plunge High Production 1/8 Dia x 7/16 x 1/4 Inch Shank

45200
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45200 features a solid carbide cutting edge.
Picture of Amana Tool ® 45202 Straight Plunge High Production 3/16 Dia x 7/16 x 1/4 Inch Shank

Amana Tool ® 45202 Straight Plunge High Production 3/16 Dia x 7/16 x 1/4 Inch Shank

45202
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45202 features a solid carbide cutting edge.
Picture of Amana Tool ® 45208 Carbide Tipped Straight Plunge High Production 1/4 Dia x 3/4 x 1/4 Inch Shank

Amana Tool ® 45208 Carbide Tipped Straight Plunge High Production 1/4 Dia x 3/4 x 1/4 Inch Shank

45208
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Picture of Amana Tool ® 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank

45210
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Picture of Amana Tool ® 45211 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 45211 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank

45211
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Picture of Amana Tool ® 45218 Carbide Tipped Straight Plunge High Production 3/8 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 45218 Carbide Tipped Straight Plunge High Production 3/8 Dia x 1 Inch x 1/4 Shank

45218
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Picture of Amana Tool ® 45226 Carbide Tipped Straight Plunge High Production 1/2 Dia x 1 Inch x 1/4 Shank

Amana Tool ® 45226 Carbide Tipped Straight Plunge High Production 1/2 Dia x 1 Inch x 1/4 Shank

45226
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Picture of Amana Tool ® 45228 Carbide Tipped Straight Plunge High Production 5/8 Dia x 3/4 x 1/4 Inch Shank

Amana Tool ® 45228 Carbide Tipped Straight Plunge High Production 5/8 Dia x 3/4 x 1/4 Inch Shank

45228
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Picture of Amana Tool ® 45230 Carbide Tipped Straight Plunge High Production 3/4 Dia x 3/4 x 1/4 Inch Shank

Amana Tool ® 45230 Carbide Tipped Straight Plunge High Production 3/4 Dia x 3/4 x 1/4 Inch Shank

45230
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Categories
Popular tags
View all
Need Assistance? Call 1-800-736-3524
. 100% secure payment

Company Info

    Customer Services

    Our Offers

    My Account

    Copyright © 2021 Flagg Incorporated. All rights reserved.